Highly Excretable Gold Supraclusters for Translatable In Vivo Raman Imaging of Tumors.

Raman spectroscopy provides excellent specificity for in vivo preclinical imaging through a readout of fingerprint-like spectra. To achieve sufficient sensitivity for in vivo Raman imaging, metallic gold nanoparticles larger than 10 nm were employed to amplify Raman signals via surface-enhanced Raman scattering (SERS). However, the inability to excrete such large gold nanoparticles has restricted the translation of Raman imaging. Here we present Raman-active metallic gold supraclusters that are biodegradable and excretable as nanoclusters. Although the small size of the gold nanocluster building blocks compromises the electromagnetic field enhancement effect, the supraclusters exhibit bright and prominent Raman scattering comparable to that of large gold nanoparticle-based SERS nanotags due to high loading of NIR-resonant Raman dyes and much suppressed fluorescence background by metallic supraclusters. The bright Raman scattering of the supraclusters was pH-responsive, and we successfully performed in vivo Raman imaging of acidic tumors in mice. Furthermore, in contrast to large gold nanoparticles that remain in the liver and spleen over 4 months, the supraclusters dissociated into small nanoclusters, and 73% of the administered dose to mice was excreted during the same period. The highly excretable Raman supraclusters demonstrated here offer great potential for clinical applications of in vivo Raman imaging.

Vibrational two-photon microscopy for tissue imaging: Short-wave infrared surface-enhanced resonance hyper-Raman scattering.

Multiphoton microscopy using short-wave infrared (SWIR) radiation offers nondestructive and high-resolution imaging through tissue. Two-photon fluorescence (TPF), for example, is commonly employed to increase the penetration depth and spatial resolution of SWIR imaging, but the broad spectral peaks limit its multiplexing capabilities. Hyper-Raman scattering, the vibrational analog of TPF, yields spectral features on the order of 20 cm-1 and reporter-functionalized noble metal nanoparticles (NPs) provide a platform for both hyper-Raman signal enhancement and selective targeting in biological media. Herein we report the first tissue imaging study employing surface-enhanced resonance hyper-Raman scattering (SERHRS), the two-photon analog of surface-enhanced resonance Raman scattering. Specifically, we employ multicore gold-silica NPs (Au@SiO2 NPs) functionalized with a near infrared-resonant cyanine dye, 3,3'-diethylthiatricarbocyanine iodide as a SERHRS reporter. SWIR SERHRS spectra are efficiently acquired from mouse spleen tissue. SWIR SERHRS combines two-photon imaging advantages with narrow vibrational peak widths, presenting future applications of multitargeted bioimaging.

Noninvasive and Highly Multiplexed Five-Color Tumor Imaging of Multicore Near-Infrared Resonant Surface-Enhanced Raman Nanoparticles In Vivo.

In vivo multiplexed imaging aims for noninvasive monitoring of tumors with multiple channels without excision of the tissue. While most of the preclinical imaging has provided a number of multiplexing channels up to three, Raman imaging with surface-enhanced Raman scattering (SERS) nanoparticles was suggested to offer higher multiplexing capability originating from their narrow spectral width. However, in vivo multiplexed SERS imaging is still in its infancy for multichannel visualization of tumors, which require both sufficient multiplicity and high sensitivity concurrently. Here we create multispectral palettes of gold multicore-near-infrared (NIR) resonant Raman dyes-silica shell SERS (NIR-SERRS) nanoparticle oligomers and demonstrate noninvasive and five-plex SERS imaging of the nanoparticle accumulation in tumors of living mice. We perform the five-plex ratiometric imaging of tumors by varying the administered ratio of the nanoparticles, which simulates the detection of multiple biomarkers with different expression levels in the tumor environment. Furthermore, since this method does not require the excision of tumor tissues at the imaging condition, we perform noninvasive and longitudinal imaging of the five-color nanoparticles in the tumors, which is not feasible with current ex vivo multiplexed tissue analysis platforms. Our work surpasses the multiplicity limit of previous preclinical tumor imaging methods while keeping enough sensitivity for tumor-targeted in vivo imaging and could enable the noninvasive assessment of multiple biological targets within the tumor microenvironment in living subjects.

Whole-body tracking of single cells via positron emission tomography.

In vivo molecular imaging can measure the average kinetics and movement routes of injected cells through the body. However, owing to non-specific accumulation of the contrast agent and its efflux from the cells, most of these imaging methods inaccurately estimate the distribution of the cells. Here, we show that single human breast cancer cells loaded with mesoporous silica nanoparticles concentrating the 68Ga radioisotope and injected into immunodeficient mice can be tracked in real time from the pattern of annihilation photons detected using positron emission tomography, with respect to anatomical landmarks derived from X-ray computed tomography. The cells travelled at an average velocity of 50 mm s-1 and arrested in the lungs 2-3 s after tail-vein injection into the mice, which is consistent with the blood-flow rate. Single-cell tracking could be used to determine the kinetics of cell trafficking and arrest during the earliest phase of the metastatic cascade, the trafficking of immune cells during cancer immunotherapy and the distribution of cells after transplantation.

Publisher Correction: A mountable toilet system for personalized health monitoring via the analysis of excreta.

An amendment to this paper has been published and can be accessed via a link at the top of the paper.

A mountable toilet system for personalized health monitoring via the analysis of excreta.

Technologies for the longitudinal monitoring of a person's health are poorly integrated with clinical workflows, and have rarely produced actionable biometric data for healthcare providers. Here, we describe easily deployable hardware and software for the long-term analysis of a user's excreta through data collection and models of human health. The 'smart' toilet, which is self-contained and operates autonomously by leveraging pressure and motion sensors, analyses the user's urine using a standard-of-care colorimetric assay that traces red-green-blue values from images of urinalysis strips, calculates the flow rate and volume of urine using computer vision as a uroflowmeter, and classifies stool according to the Bristol stool form scale using deep learning, with performance that is comparable to the performance of trained medical personnel. Each user of the toilet is identified through their fingerprint and the distinctive features of their anoderm, and the data are securely stored and analysed in an encrypted cloud server. The toilet may find uses in the screening, diagnosis and longitudinal monitoring of specific patient populations.

Facile synthesis of manganese (II)-doped ZnSe nanocrystals with controlled dimensionality.

Doping is one of the key technologies in modern semiconductor science and industry. However, the synthetic control of doped nanocrystals is difficult to achieve. Here, we report the facile synthesis of manganese (II) doped ZnSe nanocrystals with controlled dimensionality. A strong Lewis acid-base reaction using air-stable and environmentally friendly metal chlorides as precursors can readily produce a large amount of quantum-confined ZnSe:Mn2+ nanocrystals. A combination of primary and secondary amines is used to control the synthetic chemistry, which enables the shape of the doped nanocrystals to be controlled. The final doping concentration of the products can be finely tunable, which is critical for carrier relaxation dynamics. It turns out that the threshold doping level for the maximum photoluminescence intensity of doped nanocrystals highly depends on their shape. Furthermore, this simple synthetic method is extendable to obtain various Mn2+-doped II-VI semiconductor nanocrystals such as CdS:Mn2+ and ZnS:Mn2+. Our study will facilitate the fundamental understanding of the doped semiconductor nanocrystals with different shapes, which is potentially useful for a wide range of applications such as lighting, photocatalysis, and bioimaging.

Development and MPI tracking of novel hypoxia-targeted theranostic exosomes.

Treating the hypoxic region of the tumor remains a significant challenge. The goals of this study are to develop an exosome platform that can target regions of tumor hypoxia and that can be monitored in vivo using magnetic particle imaging (MPI). Four types of exosomes (generated under hypoxic or normoxic conditions, and with or without exposure to X-ray radiation) were isolated from MDA-MB-231 human breast cancer cells. Exosomes were labeled by DiO, a fluorescent lipophilic tracer, to quantify their uptake by hypoxic cancer cells. Subsequently, the exosomes were modified to carry SPIO (superparamagnetic iron oxide) nanoparticles and Olaparib (PARP inhibitor). FACS and fluorescence microscopy showed that hypoxic cells preferentially take up exosomes released by hypoxic cells, compared with other exosome formulations. In addition, the distribution of SPIO-labeled exosomes was successively imaged in vivo using MPI. Finally, the therapeutic efficacy of Olaparib-loaded exosomes was demonstrated by increased apoptosis and slower tumor growth in vivo. Our novel theranostic platform could be used as an effective strategy to monitor exosomes in vivo and deliver therapeutics to hypoxic tumors.

Two-dimensional limit of crystalline order in perovskite membrane films.

Long-range order and phase transitions in two-dimensional (2D) systems-such as magnetism, superconductivity, and crystallinity-have been important research topics for decades. The issue of 2D crystalline order has reemerged recently, with the development of exfoliated atomic crystals. Understanding the dimensional limit of crystalline phases, with different types of bonding and synthetic techniques, is at the foundation of low-dimensional materials design. We study ultrathin membranes of SrTiO3, an archetypal perovskite oxide with isotropic (3D) bonding. Atomically controlled membranes are released after synthesis by dissolving an underlying epitaxial layer. Although all unreleased films are initially single-crystalline, the SrTiO3 membrane lattice collapses below a critical thickness (5 unit cells). This crossover from algebraic to exponential decay of the crystalline coherence length is analogous to the 2D topological Berezinskii-Kosterlitz-Thouless (BKT) transition. The transition is likely driven by chemical bond breaking at the 2D layer-3D bulk interface, defining an effective dimensional phase boundary for coherent crystalline lattices.

Towards clinically translatable in vivo nanodiagnostics.

Nanodiagnostics as a field makes use of fundamental advances in nanobiotechnology to diagnose, characterize and manage disease at the molecular scale. As these strategies move closer to routine clinical use, a proper understanding of different imaging modalities, relevant biological systems and physical properties governing nanoscale interactions is necessary to rationally engineer next-generation bionanomaterials. In this Review, we analyse the background physics of several clinically relevant imaging modalities and their associated sensitivity and specificity, provide an overview of the materials currently used for in vivo nanodiagnostics, and assess the progress made towards clinical translation. This work provides a framework for understanding both the impressive progress made thus far in the nanodiagnostics field as well as presenting challenges that must be overcome to obtain widespread clinical adoption.

Highly Efficient Copper-Indium-Selenide Quantum Dot Solar Cells: Suppression of Carrier Recombination by Controlled ZnS Overlayers.

Copper-indium-selenide (CISe) quantum dots (QDs) are a promising alternative to the toxic cadmium- and lead-chalcogenide QDs generally used in photovoltaics due to their low toxicity, narrow band gap, and high absorption coefficient. Here, we demonstrate that the photovoltaic performance of CISe QD-sensitized solar cells (QDSCs) can be greatly enhanced simply by optimizing the thickness of ZnS overlayers on the QD-sensitized TiO2 electrodes. By roughly doubling the thickness of the overlayers compared to the conventional one, conversion efficiency is enhanced by about 40%. Impedance studies reveal that the thick ZnS overlayers do not affect the energetic characteristics of the photoanode, yet enhance the kinetic characteristics, leading to more efficient photovoltaic performance. In particular, both interfacial electron recombination with the electrolyte and nonradiative recombination associated with QDs are significantly reduced. As a result, our best cell yields a conversion efficiency of 8.10% under standard solar illumination, a record high for heavy metal-free QD solar cells to date.

Route to the Smallest Doped Semiconductor: Mn(2+)-Doped (CdSe)13 Clusters.

Doping semiconductor nanocrystals with magnetic transition-metal ions has attracted fundamental interest to obtain a nanoscale dilute magnetic semiconductor, which has unique spin exchange interaction between magnetic spin and exciton. So far, the study on the doped semiconductor NCs has usually been conducted with NCs with larger than 2 nm because of synthetic challenges. Herein, we report the synthesis and characterization of Mn(2+)-doped (CdSe)13 clusters, the smallest doped semiconductors. In this study, single-sized doped clusters are produced in large scale. Despite their small size, these clusters have semiconductor band structure instead of that of molecules. Surprisingly, the clusters show multiple excitonic transitions with different magneto-optical activities, which can be attributed to the fine structure splitting. Magneto-optically active states exhibit giant Zeeman splittings up to elevated temperatures (128 K) with large g-factors of 81(±8) at 4 K. Our results present a new synthetic method for doped clusters and facilitate the understanding of doped semiconductor at the boundary of molecules and quantum nanostructure.

In situ observation of divergent phase transformations in individual sulfide nanocrystals.

Inorganic nanocrystals have attracted widespread attention both for their size-dependent properties and for their potential use as building blocks in an array of applications. A complete understanding of chemical transformations in nanocrystals is important for controlling structure, composition, and electronic properties. Here, we utilize in situ high-resolution transmission electron microscopy to study structural and morphological transformations in individual sulfide nanocrystals (copper sulfide, iron sulfide, and cobalt sulfide) as they react with lithium. The experiments reveal the influence of structure and composition on the transformation pathway (conversion versus displacement reactions), and they provide a high-resolution view of the unique displacement reaction mechanism in copper sulfide in which copper metal is extruded from the crystal. The structural similarity between the initial and final phases, as well as the mobility of ions within the crystal, are seen to exert a controlling influence on the reaction pathway.

Vertical heterostructure of two-dimensional MoS2 and WSe2 with vertically aligned layers.

Two-dimensional (2D) layered materials consist of covalently bonded 2D atomic layers stacked by van der Waals interactions. Such anisotropic bonding nature gives rise to the orientation-dependent functionalities of the 2D layered materials. Different from most studies of 2D materials with their atomic layers parallel to substrate, we have recently developed layer vertically aligned 2D material nanofilms. Built on these developments, here, we demonstrate the synthesis of vertical heterostructure of n-type MoS2 and p-type WSe2 with vertically aligned atomic layers. Thin film of MoS2/WSe2 vertical structure was successfully synthesized without significant alloy formation. The heterostructure synthesis is scalable to a large area over 1 cm(2). We demonstrated the pn junction diode behavior of the heterostructure device. This novel device geometry opens up exciting opportunities for a variety of electronic and optoelectronic devices, complementary to the recent interesting vertical heterostructures with horizontal atomic layers.

Two-dimensional layered transition metal disulphides for effective encapsulation of high-capacity lithium sulphide cathodes.

Fully lithiated lithium sulphide (Li2S) is currently being explored as a promising cathode material for emerging energy storage applications. Like their sulphur counterparts, Li2S cathodes require effective encapsulation to reduce the dissolution of intermediate lithium polysulphide (Li2Sn, n=4-8) species into the electrolyte. Here we report, the encapsulation of Li2S cathodes using two-dimensional layered transition metal disulphides that possess a combination of high conductivity and strong binding with Li2S/Li2Sn species. In particular, using titanium disulphide as an encapsulation material, we demonstrate a high specific capacity of 503 mAh g(-1)(Li2S) under high C-rate conditions (4C) as well as high areal capacity of 3.0 mAh cm(-2) under high mass-loading conditions (5.3 mg(Li2S) cm(-2)). This work opens up the new prospect of using transition metal disulphides instead of conventional carbon-based materials for effective encapsulation of high-capacity electrode materials.

Copper-indium-selenide quantum dot-sensitized solar cells.

We present a new synthetic process of near infrared (NIR)-absorbing copper-indium-selenide (CISe) quantum dots (QDs) and their applications to efficient and completely heavy-metal-free QD-sensitized solar cells (QDSCs). Lewis acid-base reaction of metal iodides and selenocarbamate enabled us to produce chalcopyrite-structured CISe QDs with controlled sizes and compositions. Furthermore, gram-scale production of CISe QDs was achieved with a high reaction yield of ~73%, which is important for the commercialization of low-cost photovoltaic (PV) devices. By changing the size and composition, electronic band alignment of CISe QDs could be finely tuned to optimize the energetics of the effective light absorption and injection of electrons into the TiO2 conduction band (CB). These energy-band-engineered QDs were applied to QDSCs, and the quantum-confinement effect on the PV performances was clearly demonstrated. Our best cell yielded a conversion efficiency of 4.30% under AM1.5G one sun illumination, which is comparable to the performance of the best solar cells based on toxic lead chalcogenide or cadmium chalcogenide QDs.

High-resolution three-photon biomedical imaging using doped ZnS nanocrystals.

Three-photon excitation is a process that occurs when three photons are simultaneously absorbed within a luminophore for photo-excitation through virtual states. Although the imaging application of this process was proposed decades ago, three-photon biomedical imaging has not been realized yet owing to its intrinsic low quantum efficiency. We herein report on high-resolution in vitro and in vivo imaging by combining three-photon excitation of ZnS nanocrystals and visible emission from Mn(2+) dopants. The large three-photon cross-section of the nanocrystals enabled targeted cellular imaging under high spatial resolution, approaching the theoretical limit of three-photon excitation. Owing to the enhanced Stokes shift achieved through nanocrystal doping, the three-photon process was successfully applied to high-resolution in vivo tumour-targeted imaging. Furthermore, the biocompatibility of ZnS nanocrystals offers great potential for clinical applications of three-photon imaging.

Quantum confinement-controlled exchange coupling in manganese(II)-doped CdSe two-dimensional quantum well nanoribbons.

The impact of quantum confinement on the exchange interaction between charge carriers and magnetic dopants in semiconductor nanomaterials has been controversially discussed for more than a decade. We developed manganese-doped CdSe quantum well nanoribbons with a strong quantum confinement perpendicular to the c-axis, showing distinct heavy hole and light hole resonances up to 300 K. This allows a separate study of the s-d and the p-d exchange interactions all the way up to room temperature. Taking into account the optical selection rules and the statistical distribution of the nanoribbons orientation on the substrate, a remarkable change in particular of the s-d exchange constant with respect to bulk is indicated. Room-temperature studies revealed an unusually high effective g-factor up to ~13 encouraging the implementation of the DMS quantum well nanoribbons for (room temperature) spintronic applications.

Dimension-controlled synthesis of CdS nanocrystals: from 0D quantum dots to 2D nanoplates.

The dimension-controlled synthesis of CdS nanocrystals in the strong quantum confinement regime is reported. Zero-, one-, and two-dimensional CdS nanocrystals are selectively synthesized via low-temperature reactions using alkylamines as surface-capping ligands. The shape of the nanocrystals is controlled systematically by using different amines and reaction conditions. The 2D nanoplates have a uniform thickness as low as 1.2 nm. Furthermore, their optical absorption and emission spectra show very narrow peaks indicating extremely uniform thickness. It is demonstrated that 2D nanoplates are generated by 2D assembly of CdS magic-sized clusters formed at the nucleation stage, and subsequent attachment of the clusters. The stability of magic-sized clusters in amine solvent strongly influences the final shapes of the nanocrystals. The thickness of the nanoplates increases in a stepwise manner while retaining their uniformity, similar to the growth behavior of inorganic clusters. The 2D CdS nanoplates are a new type of quantum well with novel nanoscale properties in the strong quantum confinement regime.

Colloidal synthesis of ultrathin two-dimensional semiconductor nanocrystals.

2D semiconductor quantum wells have been recognized as potential candidates for various quantum devices. In quantum wells, electrons and holes are spatially confined within a finite thickness and freely move in 2D space. Much effort has focused on shape control of colloidal semiconductor nanocrystals(NCs), and synthesis of 2D colloidal NCs has been achieved very recently. Here, recent advances in colloidal synthesis of uniform and ultrathin 2D CdSeNCs are highlighted. Structural and optical property characterization of these quantum-sized 2D CdSe NCs is discussed. Additionally, 2D CdSe NCs doped with Mn 2+ ions for dilute magnetic semiconductors (DMS) are presented.These 2D CdSe-based NCs can be used as model systems for studying quantum-well structures.